DUAL OPERATIONAL ACTIVITY
Two output channels for monopolar cutting.
Two independent channels for calibration and the most frequent monopolar coagulation.
CONTROLLED CUTTING PROCEMIENTO
Cutting currents for incisions without scar intensified.
Cutting current coagulation properties for dissection with controlled bleeding.
Under capacitive coupling in endoscopic processes through current Slow BLEND
DOUBLE PROCEDIENTOS coagulative CONTROLLED.
SPEEDY coagulation (FORCD) and coagulation DEEP (SOFT) available for two operators.
SPRAY coagulation activated with pedal control.
Cutting bipolar selectable control bleeding.
Slow BLEND cutting current
Automatic Start and Stop separately activated coagulation.
TOTAL SAFETY FOR PATIENTS AND THE SURGEON
Acceptability impedance contact between the patient and neutral plate continuously verified by the electronic control Skin Plate Electronic Control (SPEC)
MONITORING continuous stream of radio frequency dispersion.
Variation of the offset voltage automatically before starting the RF power expenditure.
Independent selection of the coagulative current and power levels of each of the two operators.
Ten custom configurable procedures and immediately selectable.
EXTENSIONS AND DRIVING link signals.
ARGON connection attacks Plasma and fume extractor.
Control automatic diagnosis of the current full functionality of the electronic unit and connected accessories and display coded malfunctions found.
Control circuit board / patient OC
Control of leakage currents in HF.
Compensation network flow.
Maximum power monopolar cut Pure CUT300 W - 300 O
Maximum power monopolar cutting and coagulation CUT 80% 250 W - 300 O
Maximum power monopolar cutting and coagulation CUT 60% 200 W - 300 O
Maximum power monopolar cutting and coagulation CUT 40% 150 W - 300 O
Maximum power monopolar cut ENHANCED200 W - 500 O
Maximum power monopolar cutting and coagulation BLEND200 W - 300 O
Maximum power monopolar coagulation SPEEDY100 W - 500 O
Maximum power monopolar coagulation DEEP100 W - 500 O
Maximum power monopolar coagulation SPRAY70 W - 2000 O
Maximum power monopolar coagulation SPRAY ARGON70 W - 2000 O
Maximum power bipolar cutting CUT95 W - 150 O
Maximum power cutting and bipolar coagulation CUT 80% 95 W - 150 O
Maximum power cutting and bipolar coagulation CUT 60% 95 W - 150 O
Maximum power cutting and bipolar coagulation CUT 40% 60 W - 150 O
Maximum power and bipolar coagulation coret BLEND90 W - 150 O
Maximum power bipolar coagulation COAG70 W - 100 O
Working frequency monopolar / bipolar425 kHz- 525 khz.
Patient plate plate neutraF
Hz frequency red50-60
Maximum power absorbida1000 VA
SUPPLIED STANDARD SAFETY STANDARDS
Power Rankings: I CF
DDM 93/42 / EEC Class: II b