Aplicador de magnetoterapia Biomag AL115-3D-COMBI
Three-piece accessory with 3D pulses and holes for combined applications, With the possibility of folding in a closed form for rotary applications or with the possibility of fixing.
Dimensions: width 430 mm, length 1150 mm, height 28 mm, weight 2,1
The applicators for the Biomag type solenoid magnetotherapy have a homogeneous magnetic field. They are used in those cases where an emphasis is placed on a uniform magnetic field And when it is required to penetrate the tissue in depth (For example in the joints). The therapeutic effect can be increased using 3D-labeled with solenoids (Solenoids with patented technology by Biomag®). The intensity distribution of the pulse magnetic field all applicators can be verified by the Biomag® magnet tester.
The Flat applicators are divided into single-part and multi-part models. The applicators of several parts can be activated simultaneously or alternatively or sequentially.In multi-part applicators activated at the same time, the polarity of the adjacent parts is always opposite so as not to decrease the magnetic field strength by bending the applicator. In alternately activated applicators (Marked with 2C) or sequential (Marked with 3D), no mutual influences, so the polarity of all parties on each side of the applicator is equal. In programs created with 3D, the pulses are sent from the device to the applicator at regular intervals again and again and, bending or bringing the different parts of the applicator (Triangle shaped), The so-called rotary effect is produced which considerably intensifies the effect of the magnetic field on the organism. This solution of the applicator and the transmission of impulses is patented and protected by the company Biomag®.
*By request of the manufacturer products prices will be provided only by telephone or via email.
Tel. : 930027433 or email@example.com