Save a life faster, easier and better
The new HeartStart FR3 is Philips best professional DEA and lifesaving faster, easier and better.
As the DEA for professional use smaller and lighter than those sold by leading manufacturers *, the HeartStart FR3 contributes to the legacy of Philips: DEA rugged and reliable design that help you at all stages of the procedure.
Philips, the world leader in automated external defibrillators (AEDs), collaborated to extend its use in the treatment of sudden cardiac arrest among professionals through Forerunner and innovative HeartStart FR2.
With HeartStart FR3, Philips put the bar very high for the DEA.
Waveform: The shape parameters of SMART biphasic truncated exponential waveform is adjusted according to patient impedance.
Adult nominal maximum current 32 A (150 J in a 50 ohm load). Pediatric maximum nominal current of 19 A (50 J in a 50 ohm load) when the optional key pediatric use.
Administration details: Through the pads in anterior-anterior (Lead II) for adults and anterior-posterior position for infants and children weighing less than 25 kg (55 lb) or under 8 weight.
Controls: Buttons On / Off, shock, options. When used with the optional suitcase FR3, the Auto Start allows the FR3 defibrillator turns on automatically when you open the lid.
Indicators: LCD color display high resolution, beeper, voice prompts, and ringing tones, speaker jack connection, operating light and shock button.
Advanced Mode: Configurable via optional HeartStart Configure software.
LCD color display 320 × 240 pixels; 7.2 cm × 5.4 cm (2.8 "x 2.1").
Banda1 width of 30 Hz (-3 dB), nominal (non-diagnostic).
Derivation monitored in Lead II electrodes adult-previous previous position.
Peso1,6 kg (3 lb 8 oz) with standard battery installed FR3.
Physical and environmental requirements
Precinct: Complies with IEC529 class IP55 with battery installed.
Temperature: Operating / Standby: 0-50 ° C (32-122 ° F).
Altitud0 to 4.572 meters (0 to 15,000 ft).
Impacts / Falls: Complies with MIL-STD-810F 516.4, Procedure IV.
Tolerance (after a fall of a meter any edge, corner or surface in the standby mode).
Vibration: Complies with MIL-STD-810F 514.5 C-17.
Wireless transceiver module with Bluetooth 2.0 Class II
Retrospective data transmitted or set parameters wirelessly.
Patient analysis system
Analysis ECGEvalúa impedance pads to establish adequate contact with the patient's skin and evaluates the ECG rhythm and signal quality to determine whether to deliver the shock. Similarly, detected or pacemaker devices.
SMART CPR: Evaluate the main characteristics of the presence of VF and determines the initial treatment: first shock, or CPR first followed by quick downloading.
Sensitivity / Specificity: Meets AAMI DF80 regulations and AHA recommendations for adult defibrillation.
Quick Shock: usually charges in less than 8 seconds from the indication "Stop CPR".
FR3 primary battery
Tipo12 Vdc, 4.7 Ah, long battery life of lithium manganese dioxide.
300 shocks or 12 hours of operation at 25 ° C (77 ° F) if it is configured to monitor after the message No Shock Advised.
7.5 hours of operation at 25 ° C (77 ° F) if it is configured for CPR after the message No Shock Advised.
Standby Time: Minimum of 3 years when stored under standby environmental conditions (battery installed).
Service life 5 years.
SMART Pads III
Applications: multifunction disposable defibrillation electrodes for adults and pediatric patients. They are fast and placement and packaging can be removed and stored in the trunk of FR3 defibrillator. They can be installed upstream the FR3 defibrillator, which allows routine self-tests.
Key to infant / child (optional)
Select the appropriate power level for infants and children weighing less than 25 kg (55 lb) and under 8 weight.
Defibrillator data card FR3
Stores a minimum of 8 hours of ECG, events, and if so configured, voice recordings. It can also be used to configure the FR3 defibrillator.
Automated tests or user-initiated
Automated tests: check the internal circuits, the management system waveform, ECG acquisition, temperature, status (availability) connected accessories (SMART Pads III and defibrillator data card FR3) and battery.
Frequency of automatic tests: Daily, weekly and monthly, to ignition and during the execution of all operating modes.
User-initiated tests: automated tests and also the performance of the button, the screen and tone.
Battery and electrodes for defibrillator training FR3 (optional)
FR3 defibrillator placed in a training mode based on simulated scenarios and defibrillation therapy.
Type: Li-ion Battery 10.8 V and 4.5 Ah.
Faster: it allows you to manage the patient the right treatment more quickly and significantly reduces the time of implementation.
** It automatically turns on when you open the suitcase FR3, so from the first moment you can focus all your attention on placing the electrodes.
SMART III prewired electrodes (and drop off) are bagless to reduce the time of implementation.
The Quick Shock feature reduces the pause time between compressions during CPR and speeds shock delivery.
You can use the same SMART Pads III in adults and children to respond to a pediatric cardiac arrest more quickly.
Pediatric key reduces energy level automatically and apply CPR protocols configured for infants and children.
Easier: the DEA for professional use, the smallest and lightest of all marketed by global manufacturers in the sector, will help you in your work * It is designed to be rugged, reliable and ready at any time..
It is smaller and lighter, only 1.6 kg (3.5 lb) of all professionals DEA marketed by leading manufacturers, which makes it easier to carry along with other equipment.
The color LCD, bright, high resolution, easy to use the FR3 in noisy environments.
Thanks to the daily, weekly and monthly automatic tests on their status (which also also check the integrity of the electrodes), we can ensure that the FR3 is always prepared you need.
Protection against dust and water pressure (IP55) ensures that the FR3 will withstand the physical demands of the work environment.
The green light from the visual status indicator will flash to confirm that the FR3 is ready for use.
Bilingual configuration makes using the FR3 in bilingual work environments.
The long battery life allows management typically 300 shocks or, if so configured, offers 12 hours of monitoring that ensure that the FR3 is always prepared you need.
The CPR metronome to keep the beat quality chest compressions.
SMART III electrodes are compatible with the HeartStart FR2, so as to allow more easily standardize on a single set of electrodes for program series.
Thanks to the available updates you can enjoy the latest advances in Philips now and in the future.
Better: its design is inspired by the idea of continuous improvement with solutions for data management.
You can review, annotate, print and store instances of the DEA with HeartStart Event Review for a retrospective response time professional and improve the effectiveness of training.
It provides a more detailed description of each of the aspects of the intervention assessment and patient response to evaluate the performance, both individually and of the entire service, thanks to HeartStart Event Review Pro.
With HeartStart Data Messenger can automatically send data from the PC case professional emergency and according to the established workflow, either the doctor or the managing director.
The software development kit and allows data from Philips attach a defibrillator event to any electronic health record (SRCC).
Patient data circulating workflow as you want and use the infrastructure existentes.Desfibrilador Philips HeartStart FR3 - Workflow
* Information in the document with Philips Healthcare.
** If not using Suitcase FR3 defibrillator, press the green button on / off switch to turn on the FR3.
Not all products are available in all countries. For availability of the optional accessories, contact Philips.
To use the Philips HeartStart FR3, prescription and medical advice is required.
861,388 without ECG display.
861 389 with ECG display.
A main battery.
A set of SMART III.
Printed instructions (Setup Guide) and CD-ROM (Administrative Reference).